Fields of Application

Glycol Cooling Water

Select Application

Products that service this field

Aquatherm

Blue MF

Fibre-reinforced for stability. Reduced expansion, higher flow, light to handle, easy to weld.

Aquatherm

Blue MF RP

Multi-layer strength with added compressive performance for tougher installs.

Aquatherm

Blue UV

UV-resistant fusiolen® for pipework exposed to sunlight. Built to last outdoors.

Mayer

304 Stainless

Stainless tube for non-potable, mechanical and industrial applications.

Mayer

316L Stainless - EPDM

Austenitic stainless press-fit pipe and fittings for potable, mechanical and commercial systems.

Mayer

Stainless Roll Groove

Large diameter stainless for commerical and industrial systems.

Aquatherm

Energy – Blue

Engineered for pre-insulated heating and cooling networks. Aquatherm Energy delivers efficient thermal performance for underground and outdoor applications. Contact us to learn more.

Aquatherm

Black

Aquatherm Black is an award-winning surface heating and cooling system that disappears into the build. Install it in ceilings, walls or floors for efficient room control without bulky units.

Built for cooling systems that can’t afford to fail.

Glycol cooling systems must maintain stable temperatures, resist corrosion, and perform under constant thermal cycling, all within closed-loop networks where reliability is non-negotiable. From data centres and refrigeration plants to commercial buildings and industrial facilities, the pipework behind the scenes needs to remain robust for decades.

We supply PP-R and Stainless Steel systems engineered for chilled and heating glycol-based applications. Aquatherm PP-R delivers corrosion-proof, diffusion-tight performance with strong thermal stability and flow efficiency. Mayer 316L Stainless provides mechanical strength and durability for higher-pressure glycol circuits where stainless is preferred. Whether the project calls for PP-R’s thermal advantages or Stainless Steel’s structural performance, we help you choose the right fit. Strong materials, and the right support behind them.

Enquire now

Built for cooling systems that can’t afford to fail.

Enquire now

Key features

Optimise Thermal & Flow Performance

Glycol systems rely on efficient temperature transfer and stable flow. Aquatherm PP-R supports smooth flow and thermal efficiency, while Mayer 316L and 304 maintains performance under high mechanical loads.

Optimise Thermal & Flow Performance

Prioritise Corrosion & Diffusion Resistance

Glycol mixtures can accelerate material degradation. Aquatherm PP-R is corrosion-free and oxygen-diffusion-tight, and Mayer 316L and 304 offers durable resistance in closed-loop glycol systems.

Prioritise Corrosion & Diffusion Resistance

Glycol mixtures can accelerate material degradation. Aquatherm PP-R is corrosion-free and oxygen-diffusion-tight, and Mayer 316L and 304 offers durable resistance in closed-loop glycol systems.

Support Jointing Integrity

Glycol cooling networks depend on consistent, reliable connections. Aquatherm PP-R uses heat-fusion welding for uniform joints, while Mayer 316L and 304 provide robust press-fit connections.

Support Jointing Integrity

Glycol cooling networks depend on consistent, reliable connections. Aquatherm PP-R uses heat-fusion welding for uniform joints, while Mayer 316L and 304 provide robust press-fit connections.

Engineer for System Demands

Glycol systems must manage thermal cycling, low temperatures and long operating hours. Aquatherm PP-R delivers stable, proven performance in glycol installations nationally, and Mayer 316L and 304 provide strength for glycol circuits.

Engineer for System Demands

Fields of Application

Pure Water & RO
Pure water, RO, and deionised systems demand absolute material stability. Any contamination, corrosion, or breakdown can compromise water quality and downstream processes.
Potable Water
Potable systems must protect water quality from source to tap. Materials need to be lead free, non-leaching, corrosion-resistant and built to meet recognised standards. Long-term reliability isn’t optional, it’s expected.
Non Potable & Process Water
Non-potable and process water systems still demand durability and fit-for-purpose design. Variable water quality and reuse applications require corrosion-resistant, reliable, cost-effective materials.
Rainwater Harvesting
Rainwater systems manage variable water quality and environmental exposure. Long-term durability and reliable jointing underpin effective reuse.
HVAC
Heating and cooling networks operate under temperature variances, vibration and continuous load. Long-term efficiency relies on corrosion resistance, joint integrity and consistent system performance.
Glycol Cooling Water
Glycol systems demand long-term thermal stability. Material compatibility, corrosion resistance and dependable flow are essential to maintaining system efficiency and protecting critical heating and cooling infrastructure.
Industrial Piping
Industrial systems operate under pressure, temperature fluctuation and continuous load. Performance depends on corrosion resistance, material compatibility and compliance with recognised standards.
Compressed Air
Compressed air networks run under constant pressure and mechanical stress. Corrosion resistance, seal integrity and safe long-term performance are essential.
Geothermal
Geothermal systems operate in challenging environments for decades. Materials must handle pressure, ground conditions and continuous temperature exchange without degradation.
Chemical Transport
Chemical systems require strict compatibility and stable containment. Media, temperature and concentration all influence material choice. Performance depends on selecting the right solution for the media.
Sport and Industrial Floor Heating
Large-scale radiant systems must deliver even heat across significant areas. Once installed, access is limited, so durability, oxygen control and long-term thermal stability matter.
Fire Protection
Fire systems must perform instantly, often after years of inactivity. Corrosion resistance, clear flow paths and compliance-driven design are fundamental.
Radiant Heating
From residential slab heating to large-scale commercial floor systems, radiant projects demand long-term performance. Once embedded, access is limited, so compliance, oxygen control and material reliability must be right from the start.
Gas
Gas systems demand absolute integrity. Materials, jointing and sealing must meet recognised gas compliance standards and perform without compromise under pressure.
Data Centre Cooling
Data centre cooling supports mission-critical uptime. Thermal stability, corrosion resistance and scalable system integrity are central to performance.
In-Ground
In-ground systems need to perform long term under pressure, movement and changing ground conditions. Durability, joint integrity and long-term system reliability are central to performance
Pure Water & RO
Pure water, RO, and deionised systems demand absolute material stability. Any contamination, corrosion, or breakdown can compromise water quality and downstream processes.
Potable Water
Potable systems must protect water quality from source to tap. Materials need to be lead free, non-leaching, corrosion-resistant and built to meet recognised standards. Long-term reliability isn’t optional, it’s expected.
Non Potable & Process Water
Non-potable and process water systems still demand durability and fit-for-purpose design. Variable water quality and reuse applications require corrosion-resistant, reliable, cost-effective materials.
Rainwater Harvesting
Rainwater systems manage variable water quality and environmental exposure. Long-term durability and reliable jointing underpin effective reuse.
HVAC
Heating and cooling networks operate under temperature variances, vibration and continuous load. Long-term efficiency relies on corrosion resistance, joint integrity and consistent system performance.
Glycol Cooling Water
Glycol systems demand long-term thermal stability. Material compatibility, corrosion resistance and dependable flow are essential to maintaining system efficiency and protecting critical heating and cooling infrastructure.
Industrial Piping
Industrial systems operate under pressure, temperature fluctuation and continuous load. Performance depends on corrosion resistance, material compatibility and compliance with recognised standards.
Compressed Air
Compressed air networks run under constant pressure and mechanical stress. Corrosion resistance, seal integrity and safe long-term performance are essential.
Geothermal
Geothermal systems operate in challenging environments for decades. Materials must handle pressure, ground conditions and continuous temperature exchange without degradation.
Chemical Transport
Chemical systems require strict compatibility and stable containment. Media, temperature and concentration all influence material choice. Performance depends on selecting the right solution for the media.
Sport and Industrial Floor Heating
Large-scale radiant systems must deliver even heat across significant areas. Once installed, access is limited, so durability, oxygen control and long-term thermal stability matter.
Fire Protection
Fire systems must perform instantly, often after years of inactivity. Corrosion resistance, clear flow paths and compliance-driven design are fundamental.
Radiant Heating
From residential slab heating to large-scale commercial floor systems, radiant projects demand long-term performance. Once embedded, access is limited, so compliance, oxygen control and material reliability must be right from the start.
Gas
Gas systems demand absolute integrity. Materials, jointing and sealing must meet recognised gas compliance standards and perform without compromise under pressure.
Data Centre Cooling
Data centre cooling supports mission-critical uptime. Thermal stability, corrosion resistance and scalable system integrity are central to performance.
In-Ground
In-ground systems need to perform long term under pressure, movement and changing ground conditions. Durability, joint integrity and long-term system reliability are central to performance
Pure Water & RO
Pure water, RO, and deionised systems demand absolute material stability. Any contamination, corrosion, or breakdown can compromise water quality and downstream processes.
Potable Water
Potable systems must protect water quality from source to tap. Materials need to be lead free, non-leaching, corrosion-resistant and built to meet recognised standards. Long-term reliability isn’t optional, it’s expected.
Non Potable & Process Water
Non-potable and process water systems still demand durability and fit-for-purpose design. Variable water quality and reuse applications require corrosion-resistant, reliable, cost-effective materials.
Rainwater Harvesting
Rainwater systems manage variable water quality and environmental exposure. Long-term durability and reliable jointing underpin effective reuse.
HVAC
Heating and cooling networks operate under temperature variances, vibration and continuous load. Long-term efficiency relies on corrosion resistance, joint integrity and consistent system performance.
Glycol Cooling Water
Glycol systems demand long-term thermal stability. Material compatibility, corrosion resistance and dependable flow are essential to maintaining system efficiency and protecting critical heating and cooling infrastructure.
Industrial Piping
Industrial systems operate under pressure, temperature fluctuation and continuous load. Performance depends on corrosion resistance, material compatibility and compliance with recognised standards.
Compressed Air
Compressed air networks run under constant pressure and mechanical stress. Corrosion resistance, seal integrity and safe long-term performance are essential.
Geothermal
Geothermal systems operate in challenging environments for decades. Materials must handle pressure, ground conditions and continuous temperature exchange without degradation.
Chemical Transport
Chemical systems require strict compatibility and stable containment. Media, temperature and concentration all influence material choice. Performance depends on selecting the right solution for the media.
Sport and Industrial Floor Heating
Large-scale radiant systems must deliver even heat across significant areas. Once installed, access is limited, so durability, oxygen control and long-term thermal stability matter.
Fire Protection
Fire systems must perform instantly, often after years of inactivity. Corrosion resistance, clear flow paths and compliance-driven design are fundamental.
Radiant Heating
From residential slab heating to large-scale commercial floor systems, radiant projects demand long-term performance. Once embedded, access is limited, so compliance, oxygen control and material reliability must be right from the start.
Gas
Gas systems demand absolute integrity. Materials, jointing and sealing must meet recognised gas compliance standards and perform without compromise under pressure.
Data Centre Cooling
Data centre cooling supports mission-critical uptime. Thermal stability, corrosion resistance and scalable system integrity are central to performance.
In-Ground
In-ground systems need to perform long term under pressure, movement and changing ground conditions. Durability, joint integrity and long-term system reliability are central to performance
Pure Water & RO
Pure water, RO, and deionised systems demand absolute material stability. Any contamination, corrosion, or breakdown can compromise water quality and downstream processes.
Potable Water
Potable systems must protect water quality from source to tap. Materials need to be lead free, non-leaching, corrosion-resistant and built to meet recognised standards. Long-term reliability isn’t optional, it’s expected.
Non Potable & Process Water
Non-potable and process water systems still demand durability and fit-for-purpose design. Variable water quality and reuse applications require corrosion-resistant, reliable, cost-effective materials.
Rainwater Harvesting
Rainwater systems manage variable water quality and environmental exposure. Long-term durability and reliable jointing underpin effective reuse.
HVAC
Heating and cooling networks operate under temperature variances, vibration and continuous load. Long-term efficiency relies on corrosion resistance, joint integrity and consistent system performance.
Glycol Cooling Water
Glycol systems demand long-term thermal stability. Material compatibility, corrosion resistance and dependable flow are essential to maintaining system efficiency and protecting critical heating and cooling infrastructure.
Industrial Piping
Industrial systems operate under pressure, temperature fluctuation and continuous load. Performance depends on corrosion resistance, material compatibility and compliance with recognised standards.
Compressed Air
Compressed air networks run under constant pressure and mechanical stress. Corrosion resistance, seal integrity and safe long-term performance are essential.
Geothermal
Geothermal systems operate in challenging environments for decades. Materials must handle pressure, ground conditions and continuous temperature exchange without degradation.
Chemical Transport
Chemical systems require strict compatibility and stable containment. Media, temperature and concentration all influence material choice. Performance depends on selecting the right solution for the media.
Sport and Industrial Floor Heating
Large-scale radiant systems must deliver even heat across significant areas. Once installed, access is limited, so durability, oxygen control and long-term thermal stability matter.
Fire Protection
Fire systems must perform instantly, often after years of inactivity. Corrosion resistance, clear flow paths and compliance-driven design are fundamental.
Radiant Heating
From residential slab heating to large-scale commercial floor systems, radiant projects demand long-term performance. Once embedded, access is limited, so compliance, oxygen control and material reliability must be right from the start.
Gas
Gas systems demand absolute integrity. Materials, jointing and sealing must meet recognised gas compliance standards and perform without compromise under pressure.
Data Centre Cooling
Data centre cooling supports mission-critical uptime. Thermal stability, corrosion resistance and scalable system integrity are central to performance.
In-Ground
In-ground systems need to perform long term under pressure, movement and changing ground conditions. Durability, joint integrity and long-term system reliability are central to performance

Pure Water & RO
Pure water, RO, and deionised systems demand absolute material stability. Any contamination, corrosion, or breakdown can compromise water quality and downstream processes.
Potable Water
Potable systems must protect water quality from source to tap. Materials need to be lead free, non-leaching, corrosion-resistant and built to meet recognised standards. Long-term reliability isn’t optional, it’s expected.
Non Potable & Process Water
Non-potable and process water systems still demand durability and fit-for-purpose design. Variable water quality and reuse applications require corrosion-resistant, reliable, cost-effective materials.
Rainwater Harvesting
Rainwater systems manage variable water quality and environmental exposure. Long-term durability and reliable jointing underpin effective reuse.
HVAC
Heating and cooling networks operate under temperature variances, vibration and continuous load. Long-term efficiency relies on corrosion resistance, joint integrity and consistent system performance.
Glycol Cooling Water
Glycol systems demand long-term thermal stability. Material compatibility, corrosion resistance and dependable flow are essential to maintaining system efficiency and protecting critical heating and cooling infrastructure.
Industrial Piping
Industrial systems operate under pressure, temperature fluctuation and continuous load. Performance depends on corrosion resistance, material compatibility and compliance with recognised standards.
Compressed Air
Compressed air networks run under constant pressure and mechanical stress. Corrosion resistance, seal integrity and safe long-term performance are essential.
Geothermal
Geothermal systems operate in challenging environments for decades. Materials must handle pressure, ground conditions and continuous temperature exchange without degradation.
Chemical Transport
Chemical systems require strict compatibility and stable containment. Media, temperature and concentration all influence material choice. Performance depends on selecting the right solution for the media.
Sport and Industrial Floor Heating
Large-scale radiant systems must deliver even heat across significant areas. Once installed, access is limited, so durability, oxygen control and long-term thermal stability matter.
Fire Protection
Fire systems must perform instantly, often after years of inactivity. Corrosion resistance, clear flow paths and compliance-driven design are fundamental.
Radiant Heating
From residential slab heating to large-scale commercial floor systems, radiant projects demand long-term performance. Once embedded, access is limited, so compliance, oxygen control and material reliability must be right from the start.
Gas
Gas systems demand absolute integrity. Materials, jointing and sealing must meet recognised gas compliance standards and perform without compromise under pressure.
Data Centre Cooling
Data centre cooling supports mission-critical uptime. Thermal stability, corrosion resistance and scalable system integrity are central to performance.
In-Ground
In-ground systems need to perform long term under pressure, movement and changing ground conditions. Durability, joint integrity and long-term system reliability are central to performance
Pure Water & RO
Pure water, RO, and deionised systems demand absolute material stability. Any contamination, corrosion, or breakdown can compromise water quality and downstream processes.
Potable Water
Potable systems must protect water quality from source to tap. Materials need to be lead free, non-leaching, corrosion-resistant and built to meet recognised standards. Long-term reliability isn’t optional, it’s expected.
Non Potable & Process Water
Non-potable and process water systems still demand durability and fit-for-purpose design. Variable water quality and reuse applications require corrosion-resistant, reliable, cost-effective materials.
Rainwater Harvesting
Rainwater systems manage variable water quality and environmental exposure. Long-term durability and reliable jointing underpin effective reuse.
HVAC
Heating and cooling networks operate under temperature variances, vibration and continuous load. Long-term efficiency relies on corrosion resistance, joint integrity and consistent system performance.
Glycol Cooling Water
Glycol systems demand long-term thermal stability. Material compatibility, corrosion resistance and dependable flow are essential to maintaining system efficiency and protecting critical heating and cooling infrastructure.
Industrial Piping
Industrial systems operate under pressure, temperature fluctuation and continuous load. Performance depends on corrosion resistance, material compatibility and compliance with recognised standards.
Compressed Air
Compressed air networks run under constant pressure and mechanical stress. Corrosion resistance, seal integrity and safe long-term performance are essential.
Geothermal
Geothermal systems operate in challenging environments for decades. Materials must handle pressure, ground conditions and continuous temperature exchange without degradation.
Chemical Transport
Chemical systems require strict compatibility and stable containment. Media, temperature and concentration all influence material choice. Performance depends on selecting the right solution for the media.
Sport and Industrial Floor Heating
Large-scale radiant systems must deliver even heat across significant areas. Once installed, access is limited, so durability, oxygen control and long-term thermal stability matter.
Fire Protection
Fire systems must perform instantly, often after years of inactivity. Corrosion resistance, clear flow paths and compliance-driven design are fundamental.
Radiant Heating
From residential slab heating to large-scale commercial floor systems, radiant projects demand long-term performance. Once embedded, access is limited, so compliance, oxygen control and material reliability must be right from the start.
Gas
Gas systems demand absolute integrity. Materials, jointing and sealing must meet recognised gas compliance standards and perform without compromise under pressure.
Data Centre Cooling
Data centre cooling supports mission-critical uptime. Thermal stability, corrosion resistance and scalable system integrity are central to performance.
In-Ground
In-ground systems need to perform long term under pressure, movement and changing ground conditions. Durability, joint integrity and long-term system reliability are central to performance
Pure Water & RO
Pure water, RO, and deionised systems demand absolute material stability. Any contamination, corrosion, or breakdown can compromise water quality and downstream processes.
Potable Water
Potable systems must protect water quality from source to tap. Materials need to be lead free, non-leaching, corrosion-resistant and built to meet recognised standards. Long-term reliability isn’t optional, it’s expected.
Non Potable & Process Water
Non-potable and process water systems still demand durability and fit-for-purpose design. Variable water quality and reuse applications require corrosion-resistant, reliable, cost-effective materials.
Rainwater Harvesting
Rainwater systems manage variable water quality and environmental exposure. Long-term durability and reliable jointing underpin effective reuse.
HVAC
Heating and cooling networks operate under temperature variances, vibration and continuous load. Long-term efficiency relies on corrosion resistance, joint integrity and consistent system performance.
Glycol Cooling Water
Glycol systems demand long-term thermal stability. Material compatibility, corrosion resistance and dependable flow are essential to maintaining system efficiency and protecting critical heating and cooling infrastructure.
Industrial Piping
Industrial systems operate under pressure, temperature fluctuation and continuous load. Performance depends on corrosion resistance, material compatibility and compliance with recognised standards.
Compressed Air
Compressed air networks run under constant pressure and mechanical stress. Corrosion resistance, seal integrity and safe long-term performance are essential.
Geothermal
Geothermal systems operate in challenging environments for decades. Materials must handle pressure, ground conditions and continuous temperature exchange without degradation.
Chemical Transport
Chemical systems require strict compatibility and stable containment. Media, temperature and concentration all influence material choice. Performance depends on selecting the right solution for the media.
Sport and Industrial Floor Heating
Large-scale radiant systems must deliver even heat across significant areas. Once installed, access is limited, so durability, oxygen control and long-term thermal stability matter.
Fire Protection
Fire systems must perform instantly, often after years of inactivity. Corrosion resistance, clear flow paths and compliance-driven design are fundamental.
Radiant Heating
From residential slab heating to large-scale commercial floor systems, radiant projects demand long-term performance. Once embedded, access is limited, so compliance, oxygen control and material reliability must be right from the start.
Gas
Gas systems demand absolute integrity. Materials, jointing and sealing must meet recognised gas compliance standards and perform without compromise under pressure.
Data Centre Cooling
Data centre cooling supports mission-critical uptime. Thermal stability, corrosion resistance and scalable system integrity are central to performance.
In-Ground
In-ground systems need to perform long term under pressure, movement and changing ground conditions. Durability, joint integrity and long-term system reliability are central to performance
Pure Water & RO
Pure water, RO, and deionised systems demand absolute material stability. Any contamination, corrosion, or breakdown can compromise water quality and downstream processes.
Potable Water
Potable systems must protect water quality from source to tap. Materials need to be lead free, non-leaching, corrosion-resistant and built to meet recognised standards. Long-term reliability isn’t optional, it’s expected.
Non Potable & Process Water
Non-potable and process water systems still demand durability and fit-for-purpose design. Variable water quality and reuse applications require corrosion-resistant, reliable, cost-effective materials.
Rainwater Harvesting
Rainwater systems manage variable water quality and environmental exposure. Long-term durability and reliable jointing underpin effective reuse.
HVAC
Heating and cooling networks operate under temperature variances, vibration and continuous load. Long-term efficiency relies on corrosion resistance, joint integrity and consistent system performance.
Glycol Cooling Water
Glycol systems demand long-term thermal stability. Material compatibility, corrosion resistance and dependable flow are essential to maintaining system efficiency and protecting critical heating and cooling infrastructure.
Industrial Piping
Industrial systems operate under pressure, temperature fluctuation and continuous load. Performance depends on corrosion resistance, material compatibility and compliance with recognised standards.
Compressed Air
Compressed air networks run under constant pressure and mechanical stress. Corrosion resistance, seal integrity and safe long-term performance are essential.
Geothermal
Geothermal systems operate in challenging environments for decades. Materials must handle pressure, ground conditions and continuous temperature exchange without degradation.
Chemical Transport
Chemical systems require strict compatibility and stable containment. Media, temperature and concentration all influence material choice. Performance depends on selecting the right solution for the media.
Sport and Industrial Floor Heating
Large-scale radiant systems must deliver even heat across significant areas. Once installed, access is limited, so durability, oxygen control and long-term thermal stability matter.
Fire Protection
Fire systems must perform instantly, often after years of inactivity. Corrosion resistance, clear flow paths and compliance-driven design are fundamental.
Radiant Heating
From residential slab heating to large-scale commercial floor systems, radiant projects demand long-term performance. Once embedded, access is limited, so compliance, oxygen control and material reliability must be right from the start.
Gas
Gas systems demand absolute integrity. Materials, jointing and sealing must meet recognised gas compliance standards and perform without compromise under pressure.
Data Centre Cooling
Data centre cooling supports mission-critical uptime. Thermal stability, corrosion resistance and scalable system integrity are central to performance.
In-Ground
In-ground systems need to perform long term under pressure, movement and changing ground conditions. Durability, joint integrity and long-term system reliability are central to performance

Product updates, insights and practical know-how straight to your inbox.

By signing up, you agree to our privacy policy.

Product updates, insights and practical know-how straight to your inbox.

By signing up, you agree to our privacy policy.

Glycol Cooling Water